Showing posts with label Project. Show all posts
Showing posts with label Project. Show all posts
Tuesday, 25 April 2017
Knowing Science project build a boat
Within this webpage everyone may perhaps enable go for a advantageous benchmark determined by investigation regarding existing posts Science project build a boat possibility argument considering various owners exactly who are searhing for the piece. with referrals Obtaining most of us work with many yahoo and google here i list imagery who are associated Science project build a boat .
Science project build a boat - to assist create the eye in our site visitors are extremely pleased to generate this page. developing products you can released is going to most people test in the future for you to seriously have an understanding of right after looking over this submit. At last, isn't a handful of key phrases that must definitely be designed to persuade a person. however , with the boundaries for terms, you can easliy mainly gift any Science project build a boat dialogue upward right here
Thursday, 20 April 2017
Canoe Pole Project Part 1
I've convinced myself to attempt another canoe-related project with basic carving tools. Lately, I've been fascinated by the poling videos on the NorthWest Woodsman site. Footage of him pushing his way up remote, shallow creeks made me want to pursue this part of the canoeing experience even more. After purchasing a cheapo ex-library copy of the classic books, Pole, Paddle, & Portage by Bill Riviere, I was convinced that I should at least try making a spruce pole.
Andy Hutyera's post on the Wooden Canoe Forums discusses plans for a canoe pole in detail, although these seem to focus on power tool usage, table saws, routers...not my cup of tea. More info the following PDF files...
• Making a Canoe Pole
• Poling A Canoe
A few online sources, including this descriptive one, make mention of using a prefab curtain rod from Home Depot, the aptly named "Home Depole". Others write about finding the perfect dead standing spruce tree with the perfect dimensions to chop down and finish with a crooked knife. My option found the middle ground...I ended up using one of the extra 12 ft long, 2x10 boards purchased to make the bark canoe building bed. It has been cluttering the garage floor for some time but I wanted to save it for something.
As luck would have it, there were no knots in the relatively straight grained portion 2 inches from the squared original edge. A chalkline was marked 1.5" from this edge, but later, I ended up marking out the future pole using a combination square for more accuracy. I also marked out other areas where poles could emerge, but all of these had some knotty flaw somewhere along the length. In the end, the wood was easily (but not evenly) split to reveal the rudimentary birth of canoe pole

Original board; Split out piece
Not as elegant as ripping an even piece with a circular saw, but with my growing aversion to power tools, this was the most appropriate manner to liberate the pole from the board. It was worked down with an axe, loading up chips in the communal fire pit and then further cleaned with the crooked knife.

"Semi-Old Fashioned" way of making a pole
The project gave me the first opportunity to try out the recently made Orien Blade crooked knife. The blade's offset and "crooked" blade angle took some getting used to. The blade was very sharp but tended to pull out the wood in scoops (a flaw in my technique for sure). In the end, I ended up using my flatter, home-made blade crooked knife to work down the edges. The pole is still a work in progress and will need to wait until my next trip up north to finalize.

Silent tools for the job
UPDATE: Pole has been completed - part 2 has been posted here
Wednesday, 12 April 2017
Typical Scope of Services Deliverables Custom Yacht Design Project
The following is a typical scope of services and deliverables provided by the Sparkman & Stephens Design Department during the design of a custom yacht.
The process normally consists of the following four (4) phases:
• Concept & Preliminary Design & Engineering Phase
• Contract Design & Engineering Phase
• Final Design & Engineering Phase
• Construction Support Phase
Concept & Preliminary Design & Engineering Phase
Preparation of a preliminary package which executes the design brief in general, including:
Documents:
• xxxx-001 – Design Brief
• xxxx-080 – Preliminary Profile Rendering
• xxxx-090 – Brief Specification
Drawings:
• xxxx-020 – Preliminary General Arrangement
• xxxx-050 – Preliminary Sail Plan
• xxxx-060 – Preliminary Deck Plan & Outboard Profile
Supporting Calculations:
• Preliminary Weights and Centers
• Preliminary Hydrostatics
• Preliminary Keel and Stability Estimate
• Preliminary Speed, Power, Endurance and Tankage Requirements
Contract Design & Engineering Phase
Preparation of a bid package as required to obtain indicative pricing from potential Builders, including:
Documents:
• xxxx-900 – Specification
• xxxx-920 – Interior Specification
• xxxx-800 – Profile Rendering
Drawings:
• xxxx-020 – Preliminary General Arrangement
• xxxx-021 – Preliminary Inboard Profile
• xxxx-025 – Preliminary Joinery Section
• xxxx-030 – Preliminary Construction Section
• xxxx-050 – Preliminary Sail Plan
• xxxx-060 – Preliminary Deck Plan & Outboard Profile
Supporting Calculations:
• Preliminary Weights and Centers
• Preliminary Hydrostatics
• Preliminary Keel and Stability Estimate
• Velocity Predictions (under sail)
• Preliminary Speed, Power, Endurance and Tankage Requirements
• Preliminary Scantlings
Additionally, S&S will assist in the review and analysis of all Builder-submitted Bid Packages.
Final Design & Engineering Phase
Preparation of a design package as required for construction, including:
Documents:
• xxxx-900 – Specification
• xxxx-700 – Trim and Stability Booklet †
Drawings:
Geometry
• xxxx-100 – Lines Plan *
• xxxx-110 – Superstructure Geometry *
• xxxx-120 – Navigation Mast Geometry *
• xxxx-140 – Keel Lines *
• xxxx-150 – Rudder Lines *
• xxxx-160 – Skeg Lines *
Arrangement
• xxxx-200 – General Arrangement
• xxxx-210 – Inboard Profile
• xxxx-211 – Starboard Inboard Profile
• xxxx-220 – Joiner Sections
• xxxx-230 – Joiner Details
Construction
• xxxx-300 – Hull Construction – Plan & Profile †
• xxxx-301 – Hull Construction – Transverse †
• xxxx-305 – Hull Shell Expansion †
• xxxx-310 – Superstructure Construction – Plan & Profile †
• xxxx-311 – Superstructure Construction – Transverse †
• xxxx-320 – Lamination Schedule
• xxxx-330 – Hull to Superstructure Joint †
• xxxx-340 – Construction Details †
• xxxx-350 – Keel Construction †
• xxxx-360 – Rudder Construction †
• xxxx-370 – Welding Schedule †
• xxxx-380 – Chainplate Construction †
• xxxx-390 – Mast Step & Partners Construction †
Machinery & Systems
• xxxx-400 – General Machinery Arrangement
• xxxx-410 – Engine Room Air Plan
• xxxx-420 – Drive Line Plan †
• xxxx-430 – Steering System Plan †
• xxxx-440 – Anchor Handling Arrangement †
• xxxx-450 – Tank Arrangement †
• xxxx-460 – Bilge & Fire System Schematic †╪
• xxxx-461 – Fresh Water System Schematic †╪
• xxxx-462 – Black & Gray Water System Schematic †╪
• xxxx-463 – Fuel Oil System Schematic †╪
• xxxx-464 – Lube & Dirty Oil System Schematic †╪
• xxxx-465 – Sea Water System Schematic †╪
• xxxx-466 – Compressed Air System Schematic †╪
Sail & Rigging
• xxxx-500 – Sail Plan
• xxxx-510 – Sheet Lead Plan
Outfit & Finish
• xxxx-600 – Deck Plan & Outboard Profile
• xxxx-601 – Presentation Profile
• xxxx-610 – Hull Marking Plan †
• xxxx-611 – Hull Striping Plan
• xxxx-620 – Boarding & Mooring Plan †
• xxxx-630 – Docking Plan
• xxxx-640 – Structural Fire Protection Plan †
• xxxx-650 – Fire & Safety Plan †
Supporting Calculations:
• Weights and Centers
• Hydrostatics
• Velocity Predictions (under sail)
• Resistance Calculations (under power)
• Speed, Power, Endurance and Tankage requirements
• Intact Stability Calculations
• Subdivision and Damage Stability Calculations †
• Hull Structure Scantlings
• Superstructure Structure Scantlings
• Sailing Balance
• Keel Design and Engineering
• Rudder Design and Engineering
• Rig Design and Engineering
• Driveline Engineering
• Engine Room Air Calculations
• Flotation and Inclining Measurements and Analysis †
†Denotes Drawings and Calculations which are to be submitted for Class and MCA approval.
* Denotes Drawings, which based on Builder practice and preference, can be supplied as 3-D surface files
╪ Denotes a System Schematic. S&S defines a System Schematic as a line diagram showing the interconnection and relationship of elements to show the philosophy and operation of the system, but does not show the physical elements. It is not intended as an installation diagram or as a complete System Design.
Construction Support Phase
S&S will inspect the quality of the work for compliance with the best applicable standards and the Client agrees that S&S shall inspect the work at reasonable intervals and be guided by S&S recommendations with regard to the quality of workmanship, materials and fittings to include:
• Consultation with the builder and review of Builder’s, and its Subcontractors’, detailed construction and shop plans with respect to aesthetics, function, performance, strength and safety.
• Periodic visits to the Builder's yard to observe and inspect the progress and quality of the work for compliance with the plans, specifications and build schedule.
• Sea Trials of the completed yacht including review of compliance to plans and specification.
• Flotation and Inclining Measurements and Analysis
• Trim and Stability Booklet
• Performance Analysis
Wednesday, 5 April 2017
Arduino weds Raspberry The Freeboard project
"If you imagine it's possible, someone else is already trying to doing it, or has already done it." The Installer.
This was how I left my musing on the fictitious open source Celestronic M1 chart plotter system. I wasn't aware at the time how extensive the efforts were by an ever increasing cabal to build these types of systems. My screen display was photoshopped, the ones below are real.
Another aspect of the Celestronic story was to illustrate how tentative marine electronics manufacturers have been in adopting new technologies, although this has certainly improved over just the past few years. It seems with each technological advancement the buying public endorses, the rest of the herd immediately follows. Raymarine introduced the e7d with both WiFi, and blue tooth, and now who doesn't have this capability? But WiFi, and Bluetooth had been laying around for many years before its adoption into marine electronics world.
This all started with a somewhat cryptic comment left on the Celestronic post by "Practical Pirate." "Check out Freeboard at 42.co.nz." I did, and this is Robert Huitema's approach to an open source hardware/software navigation system, "The Freeboard Project".

Robert built his system around the open source hardware processors the Raspberry Pi ($35.00) and the Arduino, (in this case the Mega version $60.00). In basic terms, the Arduino is used to collect and process data such as NMEA 0183/2000, wind direction, voltages and others. This part of the system can be also used as a stand alone addition to your existing navigation system.
The Raspberry Pi, receives that NMEA data from the Arduino or your current systems via USB, and does real time updating of browser pages accessible to PC's, tablets, and other mobile devices via WiFi. It also broadcasts the NMEA data over WiFi so you can access it from OpenCPN or your cellphone/tablet navigation app.
So far we have spent about $100.00. Add a USB WiFi adapter a USB hub, a serial GPS, digital compass, and wind instruments and we are now at about $500, for a system ready to navigate.






So far we have spent about $100.00. Add a USB WiFi adapter a USB hub, a serial GPS, digital compass, and wind instruments and we are now at about $500, for a system ready to navigate.

The Raspberry Pi is the processor for the world you will be able to hear and see on the displays. It has composite video in, HDMI sound and video out, and audio in. You can even add an on-board 5 megapixel camera for about $25.00. The Raspberry uses the ARM 11 processor. You will also find this in most smart phones, and the iPad. Don't let its credit card size fool you. There is a lot of computing horse power here.

The Arduino is an amazing device all by itself, and has been used in thousands of projects. You can check out this extensive list of a few of them.
The Arduino Mega microcontroller has has 16 analog inputs, and 54 digital input/out pins, of which 15 are pulse width modulated (you can use these to control DC motor speed and direction). Add to this four serial ports, and the USB interface, and you have a very capable back end processor.

Now that we have met the Arduino, it's time to talk a bit about shields. Shields are Arduino compatible boards that add additional capabilities to the system. For example you could add a gyro and accelerometer, or a CanBus shield to your Arduino. Currently there are 291 shields listed with another 390 yet to be added.

Shields "Stack" on top of Arduinos. There are some limitations on how many can be stacked because each shield has to use the resources of the Arduino at the bottom, and things like data pins don't like to share with others. But lots of specialized functionality can be added.

There are more things we can add to our system. This is an ArduIMU V3 shield with a 3 axis compass, accelerometer, and gyro that sells for about $80.00. The Freeboard project provides a software image that adds NMEA output to this device so it can also be used as a stand alone rate adjusted electronic compass. This can provide heading data for radar overlays, and inputs for the autopilot yet to come. It's impact rated for an astounding 10,000 gees so I'm pretty sure it will take the waves.

For $99.00 we can add a wind instrument that sends serial data to our Arduino. Robert also located a low cost technology that can translate Seatalk to serial RS232 that can be read by a PC. The Canboat project is working on being able to read and write NMEA N2K PGN's.
So far it is apparent that all of a vessels navigation and sensor requirements can be met with relatively inexpensive open source hardware. But what can we do about the autopilot?
The original Ardupilots were shields that stacked onto a Arduino processor. As time has passed it has morphed into a more stand alone Arduino compatible product such as the Ardupilot 2.5 pictured.
It only costs about $180.00 with enclosure. It's somewhat of an overkill for a boat. It can manage a quadcopter, or fixed wing aircraft, has a compass, gyro, accelerometer, barometer, on-board telemetry, and many more features. There is activity to turn the Ardupilot into a Arduboat, but this is primarily orientated toward the servo actuated RC community.
So can you use standard Arduino's for a boat's autopilot? The answer is absolutely yes, and Jack Edwards has built one that runs in heading mode (Auto), and tracks to a waypoint with cross error correction. It has successfully followed a 40 mile complex route. Wind instrument integration, and a rudder reference are next. In this case two Arduino Mega's are used. One to manage the GPS data which then sends it to the second Arduino that handles the balance of the autopilot tasks.
What does seem to be missing from the Arduino open source hardware collection is a Arduboat autopilot shield designed specifically for a real boat. Maybe with a rudder reference input, on-board gyro, compass, and accelerometer. The Arduino can already interface to a DC rudder drive system, and a serial GPS. Wind data, waypoint information, and other data needs can also come via the Arduino. Okay let me think for a second, let's add a couple of outputs to manage the thrusters, and don't forget some capability to control the engines. I may want my boat to do the Skyhook thing, and be able to dock itself. Have I forgotten anything? I'm sure I have.
The Celestronic story was a flight of fancy, and I threw a lot of current technology at the wall to see if any would stick. I then belatedly discovered most of it was already long stuck on the technology wall somewhere world wide. I had no idea at the time how much open source high quality hardware and software was already available.
Is the Arduino the salvation of the marine electronics industry? The answer is conceptually yes. If it isn't, it's very very close. It does provide a crystalline view of a very possible path toward the future. The basic system elements seen could be redesigned to more specifically address the elements needed by boaters along with simpler implementation tools. Your marine installer in the future could be both building, programming, and installing a system to spec, at less cost.
In the mean time the Freeboard system has some very inexpensive and clever solutions to multiplex, and wirelessly move NMEA data to PC's and mobile devices, display data and charts in a wireless browser environment, and provide accurate heading data. The modules can be used independently, or be integrated and combined. They will also play with your existing legacy marine navigation systems. The software is free, and open source also.
Is this all good for the marine electronic industry? In the long run, I think so. The open source, and third party app models can only have an overall beneficial impact. There may be tribulations dealing with patents, liability, propriety, proprietary or reliability issues, but they will work themselves out. Who could have believed just a few short years ago, that there would now be over 800,000 Apple iSomething apps available.
And speaking of apps, a client of mine just downloaded an anchor watch app for his Ipad. He can't hear his brand new cockpit mounted MFD's alarms beeping while in the cabin. It seems there are no longer any external outputs for alarm buzzers in this system. The app works great, and it costs just ninety nine cents. The Freeboard system approach doesn't have this problem, it can be created.
How about your chart plotter telling you out loud, "Shallow water, Danger." Would a built in barometer be a good idea? How about using it to Skype with another boat in coastal waters, or even a calculator to just add up the parts costs your going to buy to keep your boat running. Integrating a Spot like device into the chart plotter system so you can be followed might be cool. It would at least let people know where the boat sank. Being able to put your own digital notes on your charts like an arrow pointing to that uncharted shallow spot. I'd like that. These are all technically possible.
There is one more final note. The hardware is very low cost, and the application software is free, but at this point in time there are no turnkey packages for sale. You have to buy the computers, package them, and make them work. I've started down this path by buying an Arduino to learn about them, and there is a massive community out there to give you a hand.
Arthur C. Clarke's three laws:
1. When a distinguished but elderly scientist states that something is possible, he is almost certainly right. When he states that something is impossible, he is very probably wrong.
2. The only way of discovering the limits of the possible is to venture a little way past them into the impossible.
3. Any sufficiently advanced technology is indistinguishable from magic.
This is the link to Robert Huitema's Freeboard site.
For more information on the autopilot development you can email Jack Edwards (coyotewaits3@gmail.com).
The photo of the "stacked shields was taken by John Boxall.
Screen shots, and block diagram were courtesy of Robert Huitema.
The Raspberry photo was taken by Wikipedia user Jwrodgers and annotation was added.
The Arudino Mega photo was taken by Wikipedia user David Mellis.
Want to by an Arduino or shields? Sparkfun Electronics is a good place to start.

It only costs about $180.00 with enclosure. It's somewhat of an overkill for a boat. It can manage a quadcopter, or fixed wing aircraft, has a compass, gyro, accelerometer, barometer, on-board telemetry, and many more features. There is activity to turn the Ardupilot into a Arduboat, but this is primarily orientated toward the servo actuated RC community.
So can you use standard Arduino's for a boat's autopilot? The answer is absolutely yes, and Jack Edwards has built one that runs in heading mode (Auto), and tracks to a waypoint with cross error correction. It has successfully followed a 40 mile complex route. Wind instrument integration, and a rudder reference are next. In this case two Arduino Mega's are used. One to manage the GPS data which then sends it to the second Arduino that handles the balance of the autopilot tasks.
What does seem to be missing from the Arduino open source hardware collection is a Arduboat autopilot shield designed specifically for a real boat. Maybe with a rudder reference input, on-board gyro, compass, and accelerometer. The Arduino can already interface to a DC rudder drive system, and a serial GPS. Wind data, waypoint information, and other data needs can also come via the Arduino. Okay let me think for a second, let's add a couple of outputs to manage the thrusters, and don't forget some capability to control the engines. I may want my boat to do the Skyhook thing, and be able to dock itself. Have I forgotten anything? I'm sure I have.
The Celestronic story was a flight of fancy, and I threw a lot of current technology at the wall to see if any would stick. I then belatedly discovered most of it was already long stuck on the technology wall somewhere world wide. I had no idea at the time how much open source high quality hardware and software was already available.
Is the Arduino the salvation of the marine electronics industry? The answer is conceptually yes. If it isn't, it's very very close. It does provide a crystalline view of a very possible path toward the future. The basic system elements seen could be redesigned to more specifically address the elements needed by boaters along with simpler implementation tools. Your marine installer in the future could be both building, programming, and installing a system to spec, at less cost.
In the mean time the Freeboard system has some very inexpensive and clever solutions to multiplex, and wirelessly move NMEA data to PC's and mobile devices, display data and charts in a wireless browser environment, and provide accurate heading data. The modules can be used independently, or be integrated and combined. They will also play with your existing legacy marine navigation systems. The software is free, and open source also.
Is this all good for the marine electronic industry? In the long run, I think so. The open source, and third party app models can only have an overall beneficial impact. There may be tribulations dealing with patents, liability, propriety, proprietary or reliability issues, but they will work themselves out. Who could have believed just a few short years ago, that there would now be over 800,000 Apple iSomething apps available.
And speaking of apps, a client of mine just downloaded an anchor watch app for his Ipad. He can't hear his brand new cockpit mounted MFD's alarms beeping while in the cabin. It seems there are no longer any external outputs for alarm buzzers in this system. The app works great, and it costs just ninety nine cents. The Freeboard system approach doesn't have this problem, it can be created.
How about your chart plotter telling you out loud, "Shallow water, Danger." Would a built in barometer be a good idea? How about using it to Skype with another boat in coastal waters, or even a calculator to just add up the parts costs your going to buy to keep your boat running. Integrating a Spot like device into the chart plotter system so you can be followed might be cool. It would at least let people know where the boat sank. Being able to put your own digital notes on your charts like an arrow pointing to that uncharted shallow spot. I'd like that. These are all technically possible.
There is one more final note. The hardware is very low cost, and the application software is free, but at this point in time there are no turnkey packages for sale. You have to buy the computers, package them, and make them work. I've started down this path by buying an Arduino to learn about them, and there is a massive community out there to give you a hand.
Arthur C. Clarke's three laws:
1. When a distinguished but elderly scientist states that something is possible, he is almost certainly right. When he states that something is impossible, he is very probably wrong.
2. The only way of discovering the limits of the possible is to venture a little way past them into the impossible.
3. Any sufficiently advanced technology is indistinguishable from magic.
This is the link to Robert Huitema's Freeboard site.
For more information on the autopilot development you can email Jack Edwards (coyotewaits3@gmail.com).
The photo of the "stacked shields was taken by John Boxall.
Screen shots, and block diagram were courtesy of Robert Huitema.
The Raspberry photo was taken by Wikipedia user Jwrodgers and annotation was added.
The Arudino Mega photo was taken by Wikipedia user David Mellis.
Want to by an Arduino or shields? Sparkfun Electronics is a good place to start.
Friday, 31 March 2017
Project Binky
Bad Obsession Motorsport have just added episode 9 , what a good watch for those who like cars and changing or renovating them.
http://www.badobsessionmotorsport.co.uk/project-binky-episode-9/
How hard can it be?
Start at episode 1 and you will find out.
Smile.
Roy
http://www.badobsessionmotorsport.co.uk/project-binky-episode-9/
How hard can it be?
Start at episode 1 and you will find out.
Smile.
Roy
Friday, 17 March 2017
JOSH DESMIT ART Musky Meat Boat Box Project
The other day one of Josh DeSmit's latest artful boat boxes came across my Facebook feed and I asked him if he'd chronicle a project with step by step photographs. He answered back that he was about to start a musky boat box and soon after these images showed up in my inbox.

I always get a kick out of seeing how things are made and these boat box projects are certainly an interesting mix of mediums to create something really special and one off. Now it's time to fill it up with big flies.

















Check out the Josh DeSmit Art website and follow along on Facebook and Instagram too. want to commission your own one of a kind boat box? Contact Josh HERE.

I always get a kick out of seeing how things are made and these boat box projects are certainly an interesting mix of mediums to create something really special and one off. Now it's time to fill it up with big flies.

















Check out the Josh DeSmit Art website and follow along on Facebook and Instagram too. want to commission your own one of a kind boat box? Contact Josh HERE.
Tuesday, 28 February 2017
O Aux O Aux wherefore art thou Aux Creating a radio auxiliary input for your stereo when there isnt one A DYI project
The giddy bob above is one of my favorite problem solvers. The desired source of music for many owners is their Ipod, or Sirius and XM receivers. The problem is integrating them into an existing stereo system of a boat. Many vessel's stereos do not have an available auxiliary input available to use, and hence the Scosche solution (Don't ask me how to pronounce it!). This device is an FM modulator, and takes an audio input, and squirts the audio source directly into the radio via the antenna wire. This works much better than the wireless versions, and is much less prone to electrical interference. The little gray box can be set to several lower FM frequencies, and the sound fidelity is excellent. In this case, the wiring diagram below (click it for a better printable view) shows a satellite radio car kit system, and an Ipod both connected to the Scosche input. The caveat here is you can't play them both at the same time. I take that back, you can, but you will just hear both audio sources at the same time, and I suspect that this would be annoying, at least to me. But maybe "Mashers" could give it a try, and let me know what it sounds like. If your just doing a single device, you can use the little Ipod interface plug that comes with the unit.

The Scosche modulator can get its power from the radio's power circuit (red wire, not yellow). It uses very little current. You unplug the radio's antenna wire, and plug it into the Schoche's female antenna connector. You then take the Scosche's male antenna connector, and plug it into the radio. Yep, the antenna still works as well as it ever did before.
Now what's left is to attach the new inputs. in the drawing, I show a splitter going into each L/R input. This is a single male RCA end, with two RCA females at the other end. This allows you to hook up two inputs to the Scosche box. Connected to the two pigtails are two cables, each with two RCA male connectors at one end, and an 1/8" mini jack at the other end, that allows connection to the Ipod, and or a Siruis/XM cradle. Pick a frequency on the box, set the radio to that frequency, plug in the Ipod, and you have tunes.
For satellite radio, I often use a car kit that allows owners to move the units from the car, to the boat. These car kits come with a non-marine antenna, 12VDC plug, cradle, and a cassette tape adapter. They sell for about $30.00. I throw away the cassette adapter thingy. I can usually find a hidden place inside to mount the antenna, and I glue it down with silcone, or similar non-3M 5200 goo. I purchase a 12VDC receptacle, and plug in the power adapter, and give it a couple of wraps with tape to keep it from shaking out. This can also be tied to the radio's power source (red wire, not yellow). A little note about the car style plugs for Ipods, and car kits. They transform the 12VDC voltage to a lower level. If you cut the plug off, and wire it directly to 12VDC, you will cook your 4 gigabyte Ipod.
Above is a typical install of a Sirius cradle, and a plug for the Ipod (there is an adapter cable for the Ipod that is not shown). Here is the link for the Scosche modulator below, and the cables can be purchased at Radio Shack or equal. Happy tunes to you. http://www.scosche.com/products/sfID1/151/sfID2/159/sfID3/351/productID/417
Subscribe to:
Posts (Atom)